Gutter Installation Cost Calculator
Estimate installed gutter cost from run length and material, then layer on extras like leaf guards or tear-off. Click any i for a plain-English explanation.
Your project
Gutter run length (lf)
i
Run length
Measure the horizontal eave lines where gutters will hang — usually the perimeter of the roof edge, not the roof surface area. A typical single-story ranch often lands around 120–180 linear feet. |
|
|---|---|
Material
i
Material
Vinyl is the budget option. Aluminum is the most common residential pick. Steel costs more and lasts longer in some climates. Copper is a premium architectural choice. |
|
Your state
i
Your state
Scales midpoints for typical state-level labor and material costs versus the U.S. average. Leave on U.S. average if you are unsure. This is not a ZIP-code or contractor bid. |
|
Extra downspouts
i
Extra downspouts
Basic installs usually include a few downspouts in the per-foot price. Add extras here if you need more outlets for long runs or heavy rainfall. |
Optional add-ons
How to use this calculator
- Enter the linear feet of eave where gutters will run.
- Pick a material and your state (or U.S. average).
- Add extra downspouts if needed, then toggle leaf guards or tear-off.
- Read the result panel — on mobile, use Jump to result.
Results explained
The large number is an installed midpoint for your length and material after state scaling. The band underneath shows how bids often spread around that midpoint when labor, access, and fascia repair differ.
- Material line — gutters priced per linear foot installed.
- Add-ons — leaf guards, tear-off, and extra downspouts stacked on top.
Quick reference: installed cost per linear foot
U.S.-average midpoints used in this calculator before state scaling and add-ons.
| Material | Installed midpoint | Best for |
|---|---|---|
| Vinyl | $7 / lf | Budget replacements, shorter runs |
| Aluminum (seamless) | $11 / lf | Most common residential choice |
| Galvanized steel | $15 / lf | Higher durability in some climates |
| Copper | $28 / lf | Premium / architectural look |
Add-ons in this model: leaf guards ≈ $8/lf · tear-off ≈ $2.50/lf · extra downspout ≈ $175 each.
How the estimate is built
We multiply run length by a published-range midpoint for the material you choose — about $7/lf vinyl, $11/lf aluminum, $15/lf steel, or $28/lf copper — then apply your state’s cost multiplier versus the U.S. average.
Extra downspouts add about $175 each. Leaf guards add about $8/lf. Old gutter removal adds about $2.50/lf. The displayed range is roughly 80%–125% of the midpoint.
Example scenario
A 150 lf aluminum install at U.S. average pricing is about $1,650 before add-ons. Adding leaf guards (~$1,200) and tear-off (~$375) lands near $3,225.
FAQ
Is seamless gutter priced the same as sectional?
Seamless aluminum is what most residential bids mean. Sectional vinyl kits can undercut that on DIY; contractor seamless work usually sits near the aluminum midpoint here.
Do I need leaf guards?
Not always. Heavy tree cover makes them worth modeling; open lots often skip them. Toggle the option to see how much they move the total.
What isn’t included?
Fascia board replacement, major roof edge repairs, and permits. Ask contractors to itemize those separately if your eaves are damaged.